Accessories

Accessories

ADE Angle Drive

Machine mounted angle drives meet the need for take-off, where space does not allow a satisfactory layout of the flexible drive.

Mounted on the end of a machine, or between engine block and radiator, they allow the flex drive to come in a smooth run towards the indicator and prevent vulnerable projections into gangways and access routes.

Gear ratios of 1:1, 2:1 and 1:2 non reversing and reversing help solve ratio problems a more flexible approach to installation is possible by their use.

The angle drive mounts onto machine with 3 hole flange.

Holes 4 mm I.D. on a 47.60 mm (1.874”) P.C.D.

ADE Codes

LH or RH Offset
 

 

Non reversing or reversing

 

Input : output ratio

 

Code

 

RH

 

Non Rev

 

Rev

Non Rev

Rev

Non Rev

Rev

1:1

 

1:1

2:1

2:1

1:2

1:2

ADE11-RH000001

 

ADE11-LH000001

ADE21-RH000001

ADE21-LH000001

ADE12-RH000001

ADE12-LH000001

LH

 

Non Rev

 

Rev

Non Rev

Rev

Non Rev

Rev

1:1

 

1:1

2:1

2:1

1:2

1:2

ADE11-RH000002

 

ADE11-LH000002

ADE21-RH000002

ADE21 LH000002

ADE12-RH000002

ADE12-LH000002

R355 “One way” box (instrument fitting)

R355 “One way” box (instrument fitting)

This accessory is made to fit on the flex drive end of an instrument.

It provides a clockwise instrument drive for EITHER direction of input thereby producing a positive pointer deflection for both forward and reverse rotation of the machine. This gives twice the scale length to that of a centre zero instrument.

RGB2200 Angle Drive

RGB2200 Angle Drive

This angle drive has a “Smith’s Key” (.292” dia.) fitting and ¾” x 26 TPI union nut to screw onto the machine, and a ¾” x 26 Male thread and Female key output to take a flexible drive cable.

A number of ratios are available as are non-reversing and reversing options, output can be right hand or left hand.

Accessories (Spring Coupling)

Spring coupling

Used to take up small misalignments between take-off and instrument in direct drive systems. Three models are available, each with a maximum permissible speed of 6000 RPM.

ATM3670: 35 mm long 7 mm bore both ends

ATM12979: 35 mm long 7 mm bore one end, 9.25 mm square at the other

ATM6112-3: 57 mm long 7 mm bore one end, 9.25 mm square at the other