Typical oil pressure gauge installation

Please use the Above Image to assist in the navigation of this page, by either clicking on the component you are seeking or by clicking the text description.

Tee Piece

  Manufactured in our own Machine shop from mild steel and Zinc plated for protection

  For use when installing Oil Pressure Gauges and retaining original warning light.

 Oil Pipeline Adaptor Code OA required if connecting OL pipeline                                          

PART NUMBER

Thread Sizes

Male (A)

FEMALE (B)

90 DEGREE
TAKE OFF  

TP

1/8” x 27 NPT

1/8” x 27 NPT

1/8” x 27 NPT

£4.95

Buy Now

TPR

3/8” BSF

3/8” BSF

1/8” x 27 NPT

£4.95

Buy Now

TPV

¼” x 18 NPT

¼” x 18 NPT

1/8” x 27 NPT

£4.95

Buy Now

TPVS

¼” x 18 NPT

¼” x 27 NPT

1/8” x 27 NPT

£4.95

Buy Now

TPVW

M10 x 1.0

M10 x 1.0

1/8” x 27 NPT

£4.95

Buy Now

TP5

M10 x 1.5

M10 x 1.5

1/8” x 27 NPT

£4.95

Buy Now

TP6

M12 x 1.5

M12 x 1.5

1/8” x 27 NPT

£4.95

Buy Now

TP7

M14 x 1.5

M14 x 1.5

1/8” x 27 NPT

£4.95

Buy Now

TP8

1/8” BSPT

1/8” BSPT

1/8” x 27 NPT

£4.95

Buy Now

TP10

½” UNF

½” UNF

1/8” x 27 NPT

£4.95

Buy Now

TP11

½” UNF

1/8” BSPT

1/8” x 27 NPT

£4.95

Buy Now

TP12

M16 x 1.5

M16 x 1.5

1/8” x 27 NPT

£4.95

Buy Now

TP13

M18 x 1.5

M18 x 1.5

1/8” x 27 NPT

   £4.95

Buy Now

Click to View Tee Piece, Vehicle Application List

OIL PIPELINE ADAPTORS

 

Part No. OA   1/8” X 27 NPT male thread to 1/8” BSP male thread with nipple to take sealing washer (screws in the side of a Tee Piece) £3.95 Buy Now

 

 

 

 

Part No. OAR   1/8” BSP male thread with nipple to 1/8” BSP male thread with nipple for joining OL pipelines for rear engined vehicles or extra length           applications  £3.95 Buy Now

 

 

 

Part No. OA2   Tee Piece Blanking Plug 1/8” x 27 NPT. £3.00 Buy Now

 

 

 

 

Part No. OAA   90 Degree Angled Adaptor. Where space is at a premium allowing Pipeline to be routed without tight bends.£4.95 Buy Now

 

 OIL PRESSURE GAUGE PIPELINES

We manufacture thousands of oil pressure gauge pipelines in various lengths, styles and materials, but the ones shown below are our ‘Stock‘ range, which cover most applications.

Special custom made pipelines can be made to order, but will probably be more expensive than our stock range for small quantities. If you cannot find what you require in our stock list please contact us with your requirements. We will also, gladly quote for bulk quantities.

End Fittings

Our experience shows that the following should fit the majority of applications. 

A

Type A This is the most widely used, with 1/8” BSP Union Nut and traditional flat nipple fitting. This will fit almost all popular oil pressure gauges including Smiths, Jaeger, Speedograph etc. and our OA adaptor.

B

Type B This uses a 7/16” BSF Union Nut and coned nipple for gauges with a concave (counter sunk) fitting.

C

Type C This uses a 1/8” BSP Union Nut and olive where a compression fitting is called for.

D

Type D Used on our copper pipelines, 1/8” BSP Union Nut and traditional flat nipple, which is soldered onto the pipe.

Nylon Pipelines
These are made using Nylon tubing, which has a safe working pressure of 600 pounds per square inch (p.s.i.), all fittings are made from solid brass, and the assembled pipelines are designed to withstand a pressure of 150 p.s.i. Where appropriate, fibre washers are included.

Part No.

Length

End Fitting 1

End Fitting 2

Price £, G.B.P

OLN05-AA

5 ft   (1.5 m)

A

A

6.75

Buy Now

OLN08-AA

8 ft   (2.4 m)

A

A

6.95

Buy Now

OLN10-AA

10 ft (3.0 m)

A

A

7.25

Buy Now

OLN15-AA

15 ft (4.5 m)

A

A

7.50

Buy Now

OLN05-AB

5 ft   (1.5 m)

A

B

7.50

Buy Now

OLN08-AB

8 ft   (2.4 m)

A

B

7.75

Buy Now

OLN10-AB

10 ft (3.0 m)

A

B

8.00

Buy Now

OLN15-AB

15 ft (4.5 m)

A

B

8.50

Buy Now

OLN05-AC

5 ft   (1.5 m)

A

C

6.75

Buy Now

OLN08-AC

8 ft   (2.4 m)

A

C

6.95

Buy Now

OLN10-AC

10 ft (3.0 m)

A

C

7.25

Buy Now

OLN15-AC

15 ft (4.5 m)

A

C

7.50

Buy Now

Traditional Copper Pipelines

Made from 3/16” diameter copper tube, with brass union nuts and soldered end fittings. Every pipeline is tested to 75 p.s.i.
Ideal for use where there may be a danger from a heat source on the pipeline, and retains the original look for Classic Car enthusiasts.

 

Part No.

Length

End Fitting 1

End Fitting 2

Price £, G.B.P

OLC05-DD

5 ft   (1.5 m)

D

D

21.50

Buy Now

OLC08-DD

8 ft   (2.4 m)

D

D

23.50

Buy Now

OLC10-DD

10 ft (3.0 m)

D

D

24.50

Buy Now

OLC15-DD

15 ft (4.5 m)

D

D

26.50

Buy Now

All prices shown exclude UK Value Added Tax (VAT), and postage. This will be calculated according to quantity and weight of items purchased, and shipping destination, on the CHECKOUT page. You will be able to Check/Cancel or amend your order on the CHECKOUT page, before confirming it. Various payment options are available including :-

Secure on-line Credit/Debit card, Paypal, Cheque (drawn on UK Bank), Money or Postal Order. You can also telephone us with your Credit Card details if preferred